225mm (9”) Cutting Depth Capacity
Quick Action Locking On Rip Fence Included
Crosscutting Mitre Guide Included
Mains Powered LED work Light
Supplied with High Quality British Made Blade
Premium Grade 14” Woodworking BandsawThe bigger brother of the B300, this floor standing woodworking bandsaw has a cutting capacity of 230mm (9″), to satisfy professional workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B350 has three bearings on the blade guard. Two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Tensioning the blade correctly is made simple thanks to the features on this premium model. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system.Supplied with 1/2” x 4tpi blade, rip fence, mitre fence, work light, floor stand, 2.0m power cable and UK 3 pin plug. This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.Charnwood B350 SpecificationMaximum cutting depth 225mm (9″)Throat width 340mm (14″)Max. cutting width with fence 215mm Left / 215mm RightTable size 545mm x 515mmTable Height 1020mmTable tilt 0-45 degreesMitre Guide T-Slot (x2) 16mm / 20mmCutting speed 800 & 370m/minMotor (induction) 1100w (1.1/2hp)Blade length 2560mmBlade widths 6-25mm (1/4″ – 1″)Dimensions (WxDxH) 900mm x 720mm x 1720mmWeight 76KgRating Light TradeProduct Guarantee 5 Years
